Con-Form Camlock – For all Con-Form Boards

Description

The Con-Form Camlock is a one-piece twist-in fastener engineered for all lengths of Con-Form and Fibre-Form formwork boards. This system requires no nails or screws, simply twist and lock at any location along the back of the board.

The camlock fitting twists and locks into the groove of any Con-Form board. A steel peg is then driven between the cam lock and the board. Rotating the handle causes the camlock to securely lock onto the peg. Simple to re-adjust board height as needed.

No drilling. No nailing. No drama. Faster than nails. Cleaner than screws. Reusable job after job.

For optimal performance, allow approximately one cam lock per 0.8 to 1 metre of board length. Super Flex boards require closer spacing of 0.4 to 0.6 metres depending on the radius.

For local pickup this product is available in Canning Vale, or delivery throughout Perth WA.